Wooden kiosks. Modular system to create kiosks with folding doors: Each kiosk of our realization is composed of:
Own support platform, made with autoclave impregnated pine uprights and autoclave impregnated pine slats or alternatively multilayer with phenolic gluing 30 / 35mm.
Kiosk uprights: standard (possibility of customizing measures) size 70x70mm, all in double blade pine impregnated in an autoclave.
Side, front and back panels: all in 20mm autoclave impregnated pine beads or 20mm thick treated larch. For particular dimensions we will use suitable sections, up to the use of 30mm slats or insulated panels with insulation cavity (stifferite, polystyrene with graphite, etc.)
1-pitch or 2-pitch (gabled) or 4-pitch roof made of phenolic glued plywood, usually 15mm thick, waterproofed with slated sheath.
Single door for light up to 90 cm, or 2 doors for upper lights. Bronzed brass or stainless steel "anuba" hinges, with yale locks with cylinder.
"Flap" openings with panel which, once opened, forms the work and support surface of the kiosk and which, once closed thanks to internal hinges and manhole covers, "seals" the bar kiosk for evening closing.
The kiosks as mentioned can be totally customized in size and shapes, from the square kiosk to the hexagonal or octagonal kiosk up to even irregular shapes.
We realize on your project and following your needs, providing you with turnkey solutions.
The wooden kiosks can have as many openings as you wish, with a flap door that has two uses: support surface and evening closing.Contact Us for Info
The kiosks are made of panels and we can make them of any shape and size, with a waterproofed roof with two or more pitches or a single slope.Contact Us for Info
The lifeguard tower is ideal for bathing establishment and can be positioned on the hardest and most compact surface of the sand too, it is enough to equip it with special galvanized iron end tips. The "standard" construction foresees a turret approximately 460cm high, which leads to a sitting surface for the lifeguard at about 110cm from the ground. The uprights are 100x100mm pine double blade autoclave impregnated . The staircase is built in steps, for an easier and risk-free descent (easier to descend than a ladder). Support base with pointed end to bury the structure of about 60-70cm. Roof that can be 1 or 2 pitched. Easy assembly and disassembly thanks to through bolts.
For lifeguard watchtowers we use both wood (pine impregnated in an autoclave) and faux wood WCP composite, so as to make the structure solid and robust.Contact Us
We produce our assembly kit watch tower partially pre-assembled with stainless steel through bolts. They can be easily dismantled for correct storage.Contact Us
PiEmme srls - L.O.: Via Giotto nr 21 | 55049 | Viareggio | LU | - H.Q.: Via Dei Carpentieri nr 41 - Ind. Area "Le Bocchette" | 55041 | Camaiore | LU | Italy
P.iva: 02344710468 | Rea LU-218122 | Cod. SDI: KRRH6B9 | Ph: +39 0584 18 40 115 - mob. +39 349 69 50 184 | mail: email@example.com